Daystar Polyurethane Bushing Super Kit

The Super Kit that is made by Daystar contains bushings that have been constructed from polyurethane.  These bushings have been made so that you will be able to replace and upgrade all of the rubber bushings and mounts in your suspension system that have gotten old and worn.  The construction of these bushings is one that is durable and these pieces ensure that your suspension system will be better cushioned so that all of the harsh vibrations from the road or trail will not all be transferred right into the cab of your rig.  These pieces are also resistant to deterioration that can be caused from salt slush, oil leaks and road grime.  Additionally, these mounts are not subject to drying out and crumbling as their rubber counterparts are.  This Super Kit comes to you with a warranty that is quite comprehensive too.

Features at a Glance

• Daystar makes their Super Kit with pride right here in the USA
• The polyurethane Super Bushings kit comes to you complete with a limited warranty that is good for a lifetime
• This kit features replacement pieces that are made from polyurethane for all of the original rubber bushings and mounts in the suspension system of your rig
• The polyurethane construction is one that is high density and as such, it is able to provide you with a cushioning effect that is superior to the competition
• The polyurethane construction is also resistant to drying out and crumbling whereas the rubber ones are prone to this
• Once you have installed these new mounts on your rig, you might notice a slight difference in your ride height.  This is because the mounts that you just replace may have collapsed but these have not
• In order to properly complete the installation of these bushings, you will not need to replace your struts, shock absorbers, springs or any other suspension component that was installed by the factory

 If you have noticed that your ride is getting rougher all the time then you might want to check on the rubber bushings and mounts in your suspension system.  When these parts get collapsed, cracked or dried out they are no longer able to give you the cushioning that you deserve.  Don’t worry though; Daystar provides this Super Kit that will replace all of those pieces with new ones that are made from polyurethane.  This kit comes to you complete with all of the bushings that you will need to replace the old ones and they have been designed and manufactured using advanced processes that allow for them to be fitted and sized specifically to the OE tolerances that your rig has to ensure that they will work and offer no compromises.

Daystar Hood Cowl

The Hood Cowl kit that is made by Daystar will allow you to add a dramatic sense of style to you Jeep.  The kits consists of hood louvers that have been custom fit and they add ventilation to your engine compartment in order to keep the temperatures there at a lower level.  Included in this kit is a vent template that is meant to be used to guide you in the process of cutting holes in your hood but it is recommended that this installation be completed by a professional. 

These vent slats have been made from hard, durable polyurethane and as such, they are incredibly resistant to deterioration from salt as well as UV rays and other types of pollutants.  They are also resistant to flexing, scrapes and chips.  They also come with a warranty.

Features at a Glance

• Daystar makes their Hood Cowl with pride right here in the USA
• These Hood Cowl kits come to you complete with a warranty that is good for a lifetime
• The kit includes two of the complete louver sets – 5 pieces each – for both sides of the hood on your Jeep
• These kits have been custom sized and shaped to fit your specific Jeep
• Installation is actually a simple process.  It does involve cutting though, but there is a template included that will show you exactly where and how to cut your hood.  That being said, because there is cutting involved, it is recommended that this installation be completed by a professional
• The holes that are to be cut into the hood of your Jeep will serve as an additional point of ventilation that will work to reduce the temperatures of the engine compartment
• Anyone who sees your rig after this installation has been completed will instantly know that there is a high performance and highly tuned engine under the hood
• The polyurethane that these louvers are made from is a type that is incredibly resistant to flexing or warping even at extreme temperatures
• These louvers are easy to bolt to the hood of your Jeep once the holes have been cut into it
• Although the louvers do come to you raw, they are able to be painted

Most of the time, the first part of your Jeep that someone sees is the hood.  For the purposes of aerodynamics, this area tends to be rather bland on most vehicles.  The rigs that do differ from this norm are typically the ones that have extreme engines under the hood that call for more ventilation.  If you want to increase the flow of air under your hood in order to keep the temps down and look more ruggedly stylish then this hood cowl kit by Daystar is what you need.

Daystar Greasable Tow Shackles

Daystar makes shackles that are greasable as well as shackles that are not able to be greased.  Their Super Shackles have been designed with the extreme off road warriors on mind though.  They have a design that is very rigid and this should make you rest assured that when you are on the trails or on the daily commute, you are driving with the most stable and strongest shackles that your money can buy.

Some of their shackles – the ones they call Rock Crushers – have been made specifically for use on rigs that spend a lot of time on the trails.  These shackles have been made from ¼ inch side plates that are heavy duty and they have bushings and bolts that are able to be greased.  They have a design that is easy to be bolted together.  These Rock Crusher shackles that are brought to you by the minds at Daystar allow for your Jeep’s springs to feely articulate which then allows for your tires to be able to get a better grip on the terrain – regardless of what that terrain is.  These shackles are great for use in towing applications and they are also a great replacement for your factory installed shackles.

Features at a Glance

·         These shackles have been made by Daystar with pride right here in the USA

·         They come to you complete with a limited warranty that is good for a lifetime

·         These heavy duty shackles have been made from plate steel that has a thickness od ¼ inch

·         They have also been given a zinc plate finish so that they have more resistance to corrosion

·         These shackles are able to be greased – on both the bushings and the bolts

·         This is a great option for those who wish to replace their shackles that were installed by the factory

·         These shackle sets that are able to be greased have bolt heads that are complete with zerk nozzles that have been incorporated into them.  These nozzles have been designed specifically to spread the lubrication in a uniform manner in all areas of the bushings

·         The center bar of these shackles gives the shackle more strength while it also reduces the deflection of the axle so that you get handling that is more stable regardless of whether you are on the road or on the trails

·         These shackles are also available in a version that is not able to be greased

Axle shackles actually play a vital part in keeping rigs that are equipped with leaf springs stable.  They keep the axle secure in its intended position in order to minimize the deflection from bending while also allowing the leaf springs to have free articulation.

Daystar Comfort Ride 2.5 Inch Suspension Coil Spring Spacer Kit

The Comfort Ride lift kits are brought to you by the minds at Daystar.  It doesn’t matter if you are looking to lift the front end of your rig in order to offset that factory nose slant or if you want to lift both the front and the rear, Daystar offers you the durable bushings and spacers that have been made from polyurethane that have been designed to be able to provide you with the exact lift that you want, right where you need it.  Some of these kits include U bolts that are longer as well as add – a – leafs and shackles for those rigs that are equipped with leaf springs while other types have torsion keys specifically for those rigs that have torsion bars.  Replacing your factory installed struts, shock absorbers and springs is not a necessity.  These kits come to you with a warranty.

Features at a Glance

·         Daystar makes these 2.5 Inch Suspension Coil Spring Spacer Kits with pride right here in the USA

·         These kits do come to you complete with a warranty that is good for a lifetime

·         Everything that you will need in order to successfully complete the installation is included in the kit.  This included highly detailed step by step instructions for installation

·         You will not need to replace the struts, shock absorbers or springs that were installed by the factory

·         These spacers bolt right to your strut assemblies that were installed by the factory.  This means that the coil springs will not be preloaded and your ride quality will be maintained.

·         For those rigs that are equipped with a torsion bar, torsion keys have been included in order to achieve the lift

·         If your rig has leaf springs then you will get the kit that has the add – a leafs, shackles and U bolts that are longer in order to achieve the lift that you are looking for

·         Because the components in these kits has been created from polyurethane, there is a cushioning effect.  This avoids the harshness, vibrations and noise that can be created by two metal pieces that come into contact with each other

A suspension lift kit will enable you to add inches to the ride height of your Jeep while keeping the cost down by retaining and reusing your shocks, struts and springs that were installed by the factory.  While you won’t replace these components, you will need to add spacers to the bottom or top of the struts or shocks in order to move the frame and the axle further away from each other.  Get the lift that you want at the price you can afford with the coil spring spacer kit that is made by Daystar.

Daystar Comfort Ride 2 Inch Suspension System Lift Kit

If you are looking to get just enough lift while not having to go to the expense or the hassle of getting a full suspension lift kit then what you need is the Comfort Ride lift that is made by Daystar.  These lift kits will give the suspension system in your Jeep the boost that you want that can eliminate the sage that is often caused by gear that is heavy,  It will also give you the room that you need to add that larger wheel and tire package that you have been eyeballing.  The best part of this is that it all comes in a single package that is not only wallet friendly, it is also easy to install.

The Comfort Ride systems that are brought to you by the minds at Daystar give you a lift that is high quality while not breaking the bank.  Each one of these lift kits has been engineered to be able to work in conjunction with your factory installed components.  This works to increase the life of the suspension system while it also improves the ride quality and your overall performance.  Also, these kits come to you with everything in them that you will need to raise your Jeep up to 4 inches.

Most of the lift systems that are made by Daystar have been designed to be installed right on top of your factory installed struts, which makes the setup easy as pie.  Also, they have all been constructed from polyurethane in order to eliminate that annoying metal to metal contact.  This reduces the harmonics, vibrations and noise.  As if that were not enough. Daystar also puts every one of these kits through rigorous testing to ensure that they are worthy to have a lifetime guarantee.

Features at a Glance

·         Daystar makes their Comfort Ride 2 Inch Suspension System Lift Kit with pride right here in the USA

·         These kits come to you complete with a warranty that is good for a lifetime

·         The Comfort Ride lift kits will give your Jeep a boost in lift while not killing your bank account

·         Even though the one we are currently talking about will lift your Jeep 2 inches, these kits are available to give your Jeep a lift of up to 4 inches

·         Because the components in these kits are made from polyurethane, the metal to metal contact is eliminating which also serves to reduce the harmonics, vibration and noise

·         The Comfort Ride kits work in conjunction with your factory installed suspension components so that you get a better ride quality and handling

·         These kits have gone through rigorous testing and have been engineered to give you quality that is superior

Daystar Cam Can UTV and Roll Bar Double Mount

When you happen to be far off on one of your favorite craggy off road trails and your engine temperature light starts blinding you, you will be hard pressed to get AAA to rescue you or even to be able to get to a gas station so you can fill your water reservoir.  You always need to make sure that you are ready for this eventuality and the Cam Can by Daystar is a great way to do this.  It holds 2.5 gallons of coolant, water or whatever other fluid you feel like putting in there.

With the Cam Can you won’t need to fill the too small cargo area in your Jeep with jugs, bottles or coolers.  This ingenious Cam Can that Daystar makes will sit securely right in the middle of the spare tire for your rig.  All you need to do is attach the Cam Can mounting plate and then slide the Cam Can onto that plate before giving it a twist that will lock it into place. Anytime you need to gain access to it, just pop it right off!

Daystar builds their Cam Cans to be tough enough to be able to survive even the punishing conditions of the badlands.  These cans have been created from a polyurethane resin that is 7000 series rotation molded Paxton.  Dropping these cans accidentally or leaving them exposed to the UV rays will not have any effect on them whatsoever.   Also, if you are picky about colors – it comes in two.  This is also handy for keeping track of which one you put the coolant in and which one has water.

For those who feel the need to carry additional fluids with them, you can also get the Double Mount Kit which will allow you to carry two of these Cam Cans at once.  If you get the universal mounting kit, you can even hang the Cam Can on the wall in your garage when you are not using it.  These Cam Cans also come with a warranty.

Features at a Glance

·         Daystar makes their Cam Cans with pride right here in the USA

·         These Cans come to you complete with a warranty that is good for a lifetime

·         The Double Mount kit will allow for you to carry two if these cans at one time safely and efficiently

·         The Universal Mount kit will allow you to store the cans on the walls in your garage when you are not using them

·         Each one of the Cam Cans has the capability to hold 2.5 gallons of coolant, water or any other type of fluid

·         These Cans mount easily right to the middle of the spare tire on the back of your Jeep

Daystar Cam Can Complete Kit

When you happen to be 9 miles into a craggy, deep off road trail and all of a sudden your temperature light begins flashing, you will be hard pressed to find a gas station or get AAA to come rescue you by topping off the reservoir in your Jeep.  You need to be prepared for any eventuality and with the Cam Can that is brought to you by the minds at Daystar, you can be.  This is the ideal way for you to be able to tackle any of the trails you want while carrying 2.5 gallons of coolant, water or other fluids and not taking up any of your oh so precious cargo space in your Jeep.

That’s right.  You will not need to worry about clogging up your tiny cargo area with coolers, jugs and bottles.  This Cam Can that is made by Daystar will be stored securely right in the middle of the spare tire that is mounted on the back of your Jeep.  All you need to do to mount it in this position is to attach the included mounting plate before you slide the Cam Can on and then twist it in order to lock it into place.  Now, any time you need a drink or your Jeep needs some coolant, just pop it right off and you will be good to go.

These Cam Cans have been built ruggedly so that they will be able to survive the toughest conditions in the badlands.  They have been made from 7000 series Paxton polyurethane resin that has been rotation molded.  This means that the Cans are impervious to both UV rays and to them being dropped.  Additionally, you can choose from two colors.  Get one color for your water and the other color for the coolant your Jeep needs.

Features at a Glance

·         These Cam Cans have been made by Daystar with pride right here in the USA

·         They come to you complete with a warranty that is good for a lifetime

·         Each one of these cans has the capacity to hold 2.5 gallons of coolant, water or other types of fluids that might be needed when you are off road

·         These Cans mount with ease right in the center of your spare tire that is mounted on the rear of your Jeep

·         When you need the can, it twists off easily and doesn’t require you to use any tools to access it

·         The Cam Can is available in two color options; gray for your drinking water and green for the fluids your Jeep needs

·         They come to you complete with everything that you will need to be able to install them onto your spare tire