Daystar Hood Latches

When talking about your Jeep, there are a few things that you might want to pop – a can after you conquer the trails and the top for when you are on the trails.  Alternatively, there are a few things that you don’t want to pop.  Those include tires as well as your hood when you are driving.  Tire companies may still be working on the issue with the tires but Daystar has got the hood problem under control.  You will never have to worry about your hood flying up in your face when you have the hood latches that Daystar calls Hood Wranglers on your rig.

Daystar designed their hood wranglers specifically for Jeeps.  These latches are constructed from polyurethane that is very heavy duty and this latch kit for the hood will not stretch like those flimsy rubber latches the factory installed.  This means that you can rest assured in the knowledge that your hood will remain shut even when the terrain is treacherous and the speeds are high.  The hood wrangler hood latch kit really comes in handy for daily drivers of lifted Jeeps.  This is because lifted Jeeps commonly have gushes of air from under the Jeep.  Well guess what – with this hood latch kit made by Daystar you can finally put an end to all of that annoying shuttering.

This kit is amazingly affordable too.  This is because with the hood wrangler kit, you will use most of the hood latch components that were installed by the factory.  This also means that installation is a breeze.  In fact, this may be the most cost effective solution on the market for stopping all of that hood flutter. 

Daystar believes in their products and as such they have also included a warranty on their hood wrangler kit that is good for a lifetime.

Features at a Glance

·         The hood latch kit by Daystar is called Hood Wranglers

·         The hood wrangler kit comes to you complete with a warranty that is good for a lifetime

·         Because many of the factory installed hood latch components are retained, you still get that factory look

·         Also because you retain many of the factory installed components for the hood latch, installed is easy peasy

·         The hood wrangler kit that is made by Daystar is made from a polyurethane that is extremely heavy duty

·         This hood wrangler kit gives you a lock that is more positive for your hood so that it will remain shut securely

·         When you are driving over treacherous terrain or at high speeds, the hood latch kit that Daystar makes will eliminate all of the shakiness and flutter from the hood

·         This hood wrangler kit is a replacement for factory installed rubber hood latches that are prone to failure

 

Daystar ComfortRide 1.75 Inch Lift Kit

It doesn’t matter if you want to lift just the front end of your rig in order to offset that factory slant nose design or if you want to lift both ends equally, Daystar has what you need to get the job done.  They offer their ComfortRide lift kits that have bushings and spacers made from polyurethane and have been designed to be able to give you the exact amount of lift, right where you need it.  Some of the kits include add a leafs and longer shackles for the U bolts for those rigs that have leaf springs while others have torsion keys for those rigs that are equipped with a torsion bar.  With these kits you don’t need to replace any of your existing factory struts, shock absorbers or springs.  Each one of the ComfortRide kits made by Daystar comes to you complete with a warranty that is good for a lifetime.

Features at a Glance

·         The lifetime warranty that comes with the ComfortRide kits made by Daystar protect against any sort of manufacturer defects and not the normal wear and tear that will occur

·         Each one of the ComfortRide kits that are made by Daystar are made with pride right here in the USA

·         Complete and detailed installation instructions are included with each of the ComfortRide lift kits that Daystar makes

·         These ComfortRide lift kits come to you complete with everything that you will need for a safe and proper installation

·         With the ComfortRide kits made by Daystar, there is no need for you to replace your factory installed struts, shock absorbers and springs

·         The spacers in the ComfortRide kits are meant to be bolted directly to the tops of the factory installed strut assemblies.  This enables for the coil springs to not be preloaded while it also works to preserve your ride quality

·         Daystar has included torsion keys that have been forged in order to lift the height of the ride on rigs that are equipped with torsion bar type suspension systems

·         For rigs that are equipped with leaf springs, Daystar has included add a leafs and longer shackles for the U bolts in their ComfortRide lift kits

·         Because the components are constructed from polyurethane, all of the spacer pieces have a cushioning effect.  This means that because there is no contact from metal to metal, harshness, vibration and noise is diminished

These are great kits for anyone trying to achieve a lift on a budget.  Because of the fact that there is no need to replace your factory installed components like the springs, shock absorbers and  struts, the cost is minimized and you are still able to achieve just the amount of ride height that you are looking for.