Daystar 1 Inch Body Lift Kit

It was all the way back in 1977 that Daystar Products began making the best Jeep, truck and SUV aftermarket parts and accessories.  Now, their production processes have been upgraded and are computer controlled which enables them to ensure that you get the perfect fit for each and every part they make. 

Body Lift Kit

When you want a body lift for your rig, nobody does lifts better than Daystar.  These kits are made specifically to give your rig an inch boost in clearance.  They give you that extra room that you need to accommodate those off road wheel and tire packages, engine swaps and even skid plate belly up kits.

The body lift kits that are made by Daystar are not like the budget kits.  Budget kits will use components like sickly little spacer blocks while the kits made by Daystar will actually replace or bolster your factory parts that might be a bit weak.  The precision of this design means that you get minimal vibration and noise from the chassis while maintaining your true body and frame alignment.  In addition, these kits have been molded from a unique blend of polyester resin.  This resin is made in such a way that it is virtually impermeable to road grime and caustic materials.

Daystar lift kits include every component that you will need to get that one inch lift that you have been wanting.  Also, since these kits are vehicle specific, installation is simple.  This simple installation will allow you to get back on the road – or trails – in no time.  Best of all?  These kits come to you covered by a lifetime warranty.

Features at a Glance

·         The 1 inch body lift kit made by Daystar comes to you complete with a limited lifetime warranty

·         All of the hardware necessary for a safe and proper installation is included with the 1 inch body lift kit

·         This kit is the ideal modification for those who want a larger wheel and tire package, an engine swap or even a belly up kit

·         The precision design of this kit means that the body of your Jeep will maintain its proper alignment with the frame

·         With this kit, the body of your Jeep will be isolated from the chassis which means that you will have less vibration and a quieter ride

·         The polyurethane blend that is used for the making of this kit is one that is unique and is extremely resistant not just to road grime but also to harsh chemicals

·         You can obtain a 1 inch body lift with this kit

·         These kits are vehicle specific for a perfect fit every time

·         With this kit installed on your Jeep, you will have room for all of your off road modifications

Daystar ComfortRide 3 Inch Lift Kit

If you want to fix that factory front slump on your truck or raise both the front and the rear of your truck at the same time, Daystar makes what you need to get the results you want.  Their polyurethane bushings and spacers have been designed in such a way that they will give you the exact ride height you are in search of right where you want it to be.  Some of their kits include add a leafs and U bolt shackles for rigs that have leaf springs while others feature torsion keys for those rigs equipped with torsion bars.  With the Daystar lift kits, you will not need to replace your existing struts, shocks or springs.  These kits come to you with a lifetime warranty.

Features at a Glance

·         Complete with a limited lifetime warranty that protects against manufacturer defects while excluding damage from normal wear and tear

·         Daystar ComfortRide 3 inch lift kits are made with pride right here in the USA

·         Included with your kit is all of the hardware necessary for a safe and proper installation including detailed instructions

·         Replacing your struts, shocks and factory springs is not necessary

·         Your ride quality is retained and your coil springs are not pre-loaded due to the spacers that bolt to the top of your factory strut assemblies

·         For rigs that are equipped with torsion bar style suspension systems there are forged torsion keys included that are used to raise your ride height

·         For rigs that are equipped with leaf springs, there are add a leafs and longer U bolt shackles included that are used to raise your ride height

·         All of the spacer pieces are made from polyurethane.  This allows them to provide cushioning while avoiding the harshness, vibration and noise created by having any sort of metal to metal contact

The ComfortRide lift kits truly live up to their name by making those very important spacers from a unique sort of polyurethane as opposed to hard metal like their competitors use.  This special blend easily supports the weight of even the heaviest rigs without the spacers being deformed or crushed.  Also, because of them not being made from metal, the harshness, vibration and noise is not increased as it is with spacers made from metal.  This also allows you to retain your factory ride quality…hence the name ComfortRide.

It doesn’t matter if you need torsion bar springs, leaf springs or even coil springs, these kits by Daystar will be customized to have exactly the parts that you need for your specific rig.

Everything made by Daystar is made with pride right here in the USA and these kits come to you complete with a limited lifetime warranty.

Daystar Replacement Top Dash Storage System

If you go to the Daystar web site and look for this item, look under the category for Dash Panels.  This is a storage tray that is meant to be mounted to the dash to add some compartmentalized and useful storage while facilitating safer driving by providing a place within reach for those smaller items that we always seem to be reaching for.  It has been made from a flexible polyurethane and is resistant to things like UV rays and spills while also being both durable and flexible.  Installation is easy too.  Simply remove the OE dash top panel and place this tray in its place.  There is no need for any drilling, cutting or welding.  It comes with a limited lifetime warranty.

Features at a Glance

·         All Daystar products are made with pride right here in the USA

·         Comes to you complete with a limited lifetime warranty

·         Installs with ease using the existing OE mounting points and as such requires no drilling, cutting or welding

·         Provides you with a convenient and handy storage space for things like snacks, tissue packs, GPS units, cell phones, toll money, sunglasses and more

·         Gives you a convenient place to secure your radar detector in a low profile position

·         This particular dash panel is actually a replacement tray that will install directly in place of your OE dash top panel

·         Made from a lightweight polyurethane that is resistant to spills as well as UV rays and is very durable 

With this product, Daystar gives you a solution for keeping your smaller items within sight and reach.  This tray actually replaces your OE dash top section and utilizes the pre-existing mounting points for installation.  That said, all that you will need to install this properly is a few simple tools. 

The high quality polyurethane used to make these trays meets and at times exceeds the OE grade used by the factory.  It is very durable and as such will allow you to get a lifetime’s worth of use out of it without it getting degraded by exposure to harmful UV rays or from any type of spills. 

Daystar was founded in 1977.  They are located in Arizona and they have been instrumental in things like the research and development as well as the use of components made from polyurethane for both on and off road use.  Daystar is known around the world for the reliability and quality of their interior products, winch accessories, protective boots, suspension bushings, transmission and engine mounts and their lift kits.  Daystar strives to ensure that quality control is one of the elements that is kept at a high importance with each component they make and you can see that clearly in these replacement top dash storage systems.